Evaluasi Karakteristik Deep-v Planing Hull Dengan Menggunakan Metode Moving Grid Mesh

Samuel Samuel, Muhammad Iqbal, Andi Trimulyono, Dedi Budi Purwanto, Betty Ariani

Article Metrics

Abstract view : 173 times
PDF - 73 times

Abstract

Karakteristik Deep-v planing hull sangat dipengaruhi oleh bentuk dan kecepatan kapal. Bentuk pada haluan kapal akan mempengaruhi performance kapal pada saat kondisi air tenang dan gelombang. Semakin tinggi kecepatan kapal maka akan semakin sulit untuk memprediksi karakteristik kapal tersebut. Pada penelitian ini akan menggunakan pendekatan Computational Fluid dynamic (CFD) dengan menggunakan metode moving grid mesh untuk mengevaluasi karakteristik kapal pada saat kondisi air tenang dan gelombang regular. Perhitungan numerik menggunakan persamaan RANS (Reynolds-Averaged Navier-Stokes) dengan model turbulensi k-ε untuk memprediksi aliran turbulen. Hasil simulasi pada kondisi air tenang hambatan menunjukkan trend yang baik pada kecepatan rendah, sementara pada kecepatan tinggi ada perbedaan yang signifikan. Pada kondisi gelombang regular hasil simulasi numerik masih perlu pendekatan yang lebih baik.

Keywords

CFD, planing hull, RANS, moving grid mesh.

Full Text:

PDF

References

G. Fridsma, “A Systematic study of the rough-water performance of planing boats,” Hoboken, New Jersey, (1969).

D. Savitsky and P. W. Brown, “Procedures for hydrodynamic evaluation of planing hulls in smooth and rough water,” Mar. Technol., vol. 13, no. 4, pp. 381–400, (1976).

D. J. Kim, S. Y. Kim, Y. J. You, K. P. Rhee, S. H. Kim, and Y. G. Kim, “Design of high-speed planing hulls for the improvement of resistance and seakeeping performance,” Int. J. Nav. Archit. Ocean Eng., vol. 5, no. 1, pp. 161–177, (2013), doi: 10.3744/JNAOE.2013.5.1.161.

R. Yousefi, R. Shafaghat, and M. Shakeri, “Hydrodynamic analysis techniques for high-speed planing hulls,” Appl. Ocean Res., vol. 42, pp. 105–113, (2013), doi: 10.1016/j.apor.2013.05.004.

A. G. Avci and B. Barlas, “An experimental investigation of interceptors for a high-speed hull,” Int. J. Nav. Archit. Ocean Eng., vol. 11, pp. 256–273, (2019), doi: 10.1016/j.ijnaoe.2018.05.001.

A. Sakaki, H. Ghassemi, and S. Keyvani, “Evaluation of the hydrodynamic performance of planing boat with trim tab and interceptor and its optimization using genetic algorithm,” J. Mar. Sci. Appl., no. September, (2018), doi: 10.1007/s11804-018-0040-6.

K. W. Song, C. Y. Guo, J. Gong, P. Li, and L. Z. Wang, “Influence of interceptors, stern flaps, and their combinations on the hydrodynamic performance of a deep-vee ship,” Ocean Eng., vol. 170, pp. 306–320, (2018), doi: 10.1016/j.oceaneng.2018.10.048.

M. Mansoori, A. C. Fernandes, and H. Ghassemi, “Interceptor design for optimum trim control and minimum resistance of planing boats,” Appl. Ocean Res., vol. 69, pp. 100–115, (2017), doi: 10.1016/j.apor.2017.10.006.

M. Mansoori and A. C. Fernandes, “Interceptor and trim tab combination to prevent interceptor’s unfit effects,” Ocean Eng., vol. 134, pp. 140–156, (2017), doi: 10.1016/j.oceaneng.2017.02.024.

Samuel, M. Iqbal, and I. K. A. P. Utama, “An investigation into the resistance components of converting a traditional monohull fishing vessel into catamaran form,” Int. J. Tech, vol. 6, no. 3, pp. 432–441, (2015).

Samuel, D. J. Kim, M. Iqbal, A. Bahatmaka, and A. R. Prabowo, “Modification of Traditional catamaran to reduce total resistance: Configuration of centerbulb,” in International Maritime Association of the Mediterranean 2017, 2017, pp. 541–546.

Samuel, D. J. Kim, M. Iqbal, A. Bahatmaka, and A. Rio Prabowo, “Bulbous bow applications on a catamaran fishing vessel for improving performance,” MATEC Web Conf., vol. 159, (2018), doi: 10.1051/matecconf/201815902057.

Samuel, A. Trimulyono, and A. W. B. Santosa, “Simulasi CFD pada Kapal Planing Hull,” Kapal, vol. 16, no. 3, pp. 123–128, (2019), doi: 10.14710/kapal.v16i3.26397.

Samuel, S. Jokosisworo, M. Iqbal, P. Manik, and G. Rindo, “Verifikasi Deep-V Planing Hull Menggunakan Finite Volume Method Pada Kondisi Air Tenang,” Teknik, vol. 41, no. 2, pp. 126–133, (2020), doi: 10.14710/teknik.v0i0.29391.

A. G. Avci and B. Barlas, “An experimental and numerical study of a high-speed planing craft with full-scale validation,” J. Mar. Sci. Tech., vol. 26, no. 5, pp. 617–628, (2018), doi: 10.6119/JMST.201810.

D. J. Kim and S. Y. Kim, “Comparative study on manoeuvring performance of model and full-scale Waterjet propelled planing boats,” in International Conference on Fast Sea Transportation, 2017, pp. 126–135.

F. Moukalled, L. Mangani, and M. Darwish, “The finite volume method in computational fluid dynamics,” in Fluid Mechanics and its Applications, vol. 113, Springer, 2016.

S. Mancini, “The problem of verification and validation processes of CFD simulations of planing hulls,” Department of Industrial Engineering. Università Degli Studi Di Napoli, 2015.

ITTC, “Practical guidelines for ship CFD applications,” 2014.

Star-CCM+, “User guide star-CCM+. Version 13.02.” (2018).

Copyright (c) 2022 Warta Penelitian Perhubungan
Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Refbacks

  • There are currently no refbacks.

Jurnal Warta Penelitian Perhubungan have been indexed on: